Heat Exchange Products

Effcient Control over
Thermal Energy

Heat Exchange Products

Products

Heat Exchange Products

Purpose:
Our products reduce fuel consumption and ensure great comfort,through efficient control and balance of thermal energy. From the engine coolant, refrigerant, engine / transmission oils, airflow, exhaust gases and by saving product weight.

Strengths:
We were the first in the world to introduce aluminum radiators into the market. Using our Monozukuri technology for aluminum heat exchange products, nurtured over, more than 30 years, we continue to provide products with world-class quality.

Heat Exchange Products

Radiator

Heat Exchange ProductsRadiator

Radiator

Purpose:
Radiators refrigerate cooling water to an appropriate temperature, thereby allowing the powertrain to operate efficiently and bring about smooth driving conditions.
We have radiators with core thicknesses of 12 mm, 16 mm, 27 mm, 35 mm, and 42 mm.

Strengths:
Our new cores (12 mm and 42 mm) seek to improve heat transfer performance by using clinching type reinforcement, and expanding the effective area for heat transfer.

Condenser

Heat Exchange ProductsCondenser

Condenser

Purpose:
Condenser is a set of components of climate control systems. In climate control systems, condenser uses refrigerants to absorb heat from the cabin, and then transfer the heat to the outside environment.

Strength:
Using fine extrusion tubes, our thin condensers (12 mm) are able to achieve the same performance as traditional condensers (16 mm).
In addition, by integrating the liquid tank, we achieved a simple design with a 25% reduction in size.

Motor Fan

Heat Exchange ProductsMotor Fan

Motor Fan

<With brush>

Purpose:
Motor fans generate cooling air for radiators and condensers installed at the front ends of vehicles, as well as for other heat exchange needs.

Strengths:
With five different types from 70 W to 230W, and fan sizes that can be configured, our motor fans cover all kinds of performance requirements for heat exchange products.

See our series of Motor Fan

EGR Cooler

Heat Exchange ProductsEGR Cooler

EGR Cooler

Purpose:
This is an EGR cooler for gasoline engines. It prevents engine knocking by cooling high-temperature exhaust gas, and improves fuel efficiency by reducing pumping loss and using a high compression ratio.

Strengths:
Heat exchange efficiency is improved through the use of our VG-fin® (VG: Vortex Generator). We were able to achieve improved heat exchange performance and lighter weight.

Built-In Oil Cooler (BOC)

Heat Exchange ProductsBuilt-In Oil Cooler (BOC)

Built-In Oil Cooler (BOC)

Purpose:
This product uses coolant to cool down or warm up CVT/AT transmission fluid to an optimal temperature, to improve fuel efficiency.
We have two types of 85 mm in diameter or 100 mm diagonally.

Strengths:
By using fine inner fins, we were able to achieve a product with high heat exchange performance yet small in size. We have two types in our lineup, small diameter and low profile, to meet the needs of different vehicle layouts.

Charge Air Cooler

Heat Exchange ProductsCharge Air Cooler

Charge Air Cooler

Purpose:
This product is used in turbo charged engines to cool compressed intake air and increase its density. High-density compressed air improves the engine’s combustion efficiency and leads to higher power.

Strengths:
By optimizing the shapes of the tubes and fins, we were able to achieve a reduction in gas resistance and an improvement in heat exchange performance.